Ground pump 2GrT (K) 160/32

Centrifugal pumps 2ГрТ 160/32, 2ГрК 160/32 and electric pump units on their base are intended for pumping of highly abrasive slurries (sand, gravel, food, ore flotation, etc.), with the concentration of solids by volume to 40%, the slurry density to 1600 kg/m² , a hydrogen indicator rn from 6 to 12, a temperature of 60 C, particle size of solid particles up to 6 mm and a hardness of up to 11 000 MPa.
Pumps included in the units can be 2grt, 2grk according to the material of the flow part and the design of the housing.
2grt pumps should be used for pumping hydraulic mixtures with an average particle size of not more than 6 mm, 2grk pumps - up to 1 mm.
Pumps and aggregates are manufactured in a General industrial design and are not intended for use in explosive and fire-hazardous industries, premises and installations, and should not be used for pumping flammable and flammable liquids.
Centrifugal pumps and electric pump units 2grt 160/32 and 2grk 160/32 must meet the requirements of TU 3631-005-72181059-2005.
Pump symbol:
pump 2grt(K) 160/32 SP-UHL4, where
2 - serial number of the upgrade;
Gr - pump type (unpaved);
T – version of the flow part with an internal body;
K - the flow part of the housing is made of abrasive material on an organic bond;
160-rated feed rate at rated speed,^m3/ h;
32 - head at nominal feed rate and rotation speed, m;
SP-stuffing box shaft seal with flushing water supply;
UHL-climate version: moderately cold climate;
4 – placement category during operation according to GOST 15150-69.

Technical specifications